Current version 3.4.16

This is designed to be as relevant to its current version as possible.

The Installation

Click To Expand.

1. Run Melonloader Installer

2. Go find mods folder (Probably at C:\Program Files (x86)\Steam\steamapps\common\ChilloutVR\)

3. Drag and drop the mod into the mods folder

4. Run CVR

If you have any problems with the above I recommend you go to youtube and find some videos on how to use a computer.
If you have any problems AFTER the above I recommend you do "!logs" in the support channel and follow the instructions given.

Main Menu

Click To Expand.

Once you have loaded into CVR and go to your QuickMenu, you should see a new tab in the top right. Clicking this tab will bring you to this first menu, the main menu. After you accept the EULA.

Remove Leash

Remove Leash does as it says. If you have ANY leashes attached clicking this button will remove ALL of the leashes.

Clear Notifications

Clear Notifications clears all current notifications, even those that are currently pending. This is more used if you need to remove a build-up of T.W. requests.

TW Settings

A collection of settings for T.W. ReadMore

My TW

A collection of settings referring to your T.W. status and other information. ReadMore

Gag Pets

This toggle will attempt to gag ALL pets leashed. This will fail if the pet does not have force mute allowed.

More Pet Restrictions

A collection of restriction options that affect all connected pets, as long as the said pet has said restriction enabled. ReadMore

Avatar Remote Config

A collection of your current avatar parameters that you can set to allow the Master to control. ReadMore

Individual Pet Controls

A collection of your current pets allows for individual control of each pet. ReadMore

Leash Length

Sets the length for ALL pet leashes. THIS WILL NOT CHANGE YOUR LEASH!

Lovense Strength

Sets the strength for ALL connected pet lovense. THIS WILL NOT EFFECT YOUR LOVENSE!

PiShock Main Menu

Click To Expand.

Under the Main Menu we have the PiShock Main Menu.

Beep

It beeps ALL connected pet PiShock devices. BEEP

Vibrate

It vibrates ALL connected pet PiShock devices. BRR

Shock

It shocks ALL connected pet PiShock devices. BZZT

Height Control

Toggles on and off height control for ALL connected pet PiShock devices.

Strength

The strength of the Beep, Vibrate, and Shock for ALL connected pet PiShock devices.

Duration

The duration of the Beep, Vibrate, and Shock for ALL connected pet PiShock devices.

Shock Height

Sets the height at which if the pet goes over it will trigger height control.

Shock Height Max Strength

The max strength shock that the pet will receive when going over the height control limit.

Shock Height Min Strength

The min strength shock that the pet will receive when going over the height control limit.

Shock Height Step Strength

How fast the shocks go from Min Strength to Max Strength.

T.W. Settings

Click To Expand.

The first grouping under T.W. Settings

TW Branches

Contains the option to pick which release you will use. Beta Requires Beta Key (Changes on next start-up)

Restart Buttplug

Attempts to restart Buttplug.io

Test Toys

Vibrates your connected Lovense toys and beeps your connected Pishock toys.

Reload Config

Reloads the T.W. Settings config.

Menu Settings

A collection of menus that you can show or hide from the main menu. ReadMore

Hide The Leash

Toggles if any leash attached to you is hidden from everyone INCLUDING YOU or not.

Private Leash

Toggles if any leash attached to you is hidden from everyone EXCLUDING PET AND MASTER or not.

Auto Accept Requests From Friends Only

Checks to see if you have "Auto Accept Pet Requests" or "Auto Accept Master Requests" enabled then checks if the person requesting is your friend. If they are the request will be accepted.

Disable TW Notification System

Toggles if T.W. will use the TW system for notifications.

Pet/Master Join Notifications

Toggles if you will receive notifications when your Pet or Master joins.

Use ActionMenu Controls

Toggles if you will be able to control TW through the action menu. Requires ActionMenu Mod

Hide TW Nameplate Badges

Toggles if you will see badges on nameplates.

Pet Settings

Click To Expand.

Settings for when you are a pet.

Pet Lead Attach Point

Sets where the lead will attach to your body when you are a pet. ReadMore

Auto Accept Pet Request

Does as it says. Auto Accepts pet requests from anyone that isn't blocked on T.W.

Allow Force Mute

Allows for Master to mute you.

Enable Muffled Mode

If "Allow Force Mute" is on along with this toggle you will be muffled instead of muted.

Enable Toy Control

Enable to allow for Lovense integration with T.W. Setup

Allow Toy Control

Allow for your connected toy to be controlled through T.W.

Follow Master On World Change

If Master has "Allow Pet To Follow You" enabled when your master moves to a new world you will be pulled with them.

Allow World/Prop Pinning

Allows for your leash to be set to a prop by your master.

Allow Movement Controls

Sets if your master will be able to disallow you from flying or sitting.

Allow Blindfolding

Allows for Master to blind you.

Allow Deafening

Allows for Master to deafen you.

Blindness Radius

Sets how far you will be able to see while blind. Higher number = See more

Deafen Attenuation

Sets how much noise will be filtered out.

Master Settings

Click To Expand.

Settings for when you are a master.

Master Lead Attach Point

Sets where the lead will attach to your body when you are a master. ReadMore

Allow Pet To Follow You

Sends world change to pets to allow them to follow.

Auto Accept Master Requests

Does as it says. Auto Accepts Master Requests from *anyone* that is not blocked through T.W.

Pi Shock Settings

Click To Expand.

Settings for enabling Pi Shock features.

Shocker Management

Covered in Setup Video.

Allow Shock Control

Enable to allow for Pi Shock integration with T.W.

Allow Beep

Allow Master to Beep PiShock Devices.

Allow Vibrate

Allow Master to Vibrate PiShock Devices.

Allow Shock

Allow Master to Shock PiShock Devices.

Allow Height Control

Allow Master to toggle height control.

Height Control Warning

Receive a warning when you are about to trigger the height control shock.

Random Shocker Mode

Sends shocks to a random shocker device.

T.W. Net Settings

Click To Expand.

Settings for connecting with T.W.

Disconnect From TWNet

Should not need to be used. Disconnects you from TW Network.

Reconnect to TWNet

Should not need to be used. TW will auto-reconnect unless disconnected using "Disconnect From TWNet".

Leash Style

Allows for setting the style of the leash. Local Only.

Leash Color Config

Menu for changing your leash color. ReadMore

Custom Leash Colour

Enable for custom color

Hide Custom Leash Style

Allows for Custom Leash Style to be hidden. Custom is a user-setup leash style, not a default leash style.

Menu Settings

Click To Expand.

Logo Position Y

Sets the T.W. logo, the one used to open the menu up and down position.

Logo Position X

Sets the T.W. logo, the one used to open the menu left and right position.

Hide Pi Shock Elements

Enabling hides the Pi Shock Elements from the Main Menu.

Hide Toy Strength

Enabling hides the toy strength slider from the Main Menu.

Pet Lead Attach Point

Selecting any of these will change that to be where the leash attaches to you when you are the pet.

Master Lead Attach Point

Selecting any of these will change that to be where the leash attaches to you when you are the master.

Leash Color Config

Click To Expand.

Save

Sets the color in the color preview box as your leash color.

My_TW

Click To Expand.

Menus for status Some changes here will show on the button used to open the menu.

Enable Status

Enables having a T.W. Logo near your nametag.

Display Special Badge

Enabled Special tag on the T.W. logo if you have one.

Hide Status In Public

Hides T.W. Status in public worlds.

Show Device Status

Enables an icon to be shown if others have devices connected.

Show Auto Accept

Enables an icon to be shown if others have Auto Accept enabled.

Enter Rank Key

You get one of these if you are in the Beta.

My Achievements

An April fools prank that stuck. A menu to see all of the achievements you have got through TW.

Other stuff

Buttons for Discord, PiShock Homepage, Licences, and Eula.

More Pet Restrictions

Click To Expand.

Menu for pet restrictions. Changing these options affects all connected pets.

Temp Leash Unlock

Temporarily unlocks all leashes.

Disallow Flight

Attempts to disallow flight for all pets.

Disallow Seats

Attempts to disallow seats for all pets.

Blindfold

Attempts to blindfold all pets.

Deafen

Attempts to deafen all pets.

Set World Pin

Will make a target that appears to come from your hand. Once triggered a world pin will be set that can be used to leash all pets too.

Lock Leash to World Pin

Uses world pin set by "Set World Pin" to attempt to leash all pets to world pin.

Select Bound Prop

Opens up a menu that shows current props available to set as leash points.

Lock Leash to Prop

Toggles on and off attempting to set all pets' leash points to whichever prop is set in "Select Bound Prop".

Avatar Remote Config

Click To Expand.

Parameters

Enabling any of the parameters you see will allow the master to control them.

Individual Pet Control

COMING SOON