Shocker Integrations

Shock Control

If you want to your shock controlled make sure you enable it in the settings

Control

Each pet can be controlled via the QuickMenu. You wont get any feedbacl if the pet has a shocker connected and allowed control. Well you will probably see a reactionon the pet if it works

TW Shocker Integration Guide - by Keli Kit

The Setup

This guide assumes that you have a working/charged shocker and a computer that can Stably run the Melonloader mod “TW”.

This guide also assumes you are using a openshock or pishock shocker.

This guide assumes you have turned on shocker control in the TW settings.

If your CVR is crashing or your shocker physically isn’t working. You should probably get that fixed first.

This guide assumes too much

Shocker -> CVR

Figure out what software you shocker uses then select eaither openshock or pishock platform

Linking Shocker

Once you find out what your platform is make sure you have your API(OpenShock) or Share Code(PiShock). Once you have the API or Share Code go into TW Settings and down to shock setting.

Click To Expand.